- Code:
A216D
D-ring brass plated iron hangers n.1 - Pack 200
- Net weight: grams 216 - Gross weight: grams 229
D-ring brass plated iron hangers n.1 - Pack 200
Jointed brass-plated iron hooks
They should preferably be applied to the frame support (cardboard, masonite, etc.) rather than to the frame itself.
The diameter of the hole is too large for the tacks. They must therefore be applied to the support with a rivet or with a screw (not with a nail). Code 11R rivets can be used.
These hangers (D-Rings in English) are frequently used abroad to hang the frame with a string. In this case, two hangers are fixed on the two vertical sides of the frame and then tied with a cord.
They are available in two different sizes:
Cod. A216 - Base 9mm - Height 22mm - Hole Ø 4mm - Pack.1000 pcs
Cod. A216D - Base 9mm - Height 22mm - Hole Ø 4mm - Pack. 200 pcs
Cod. A217 - Base 10mm - Height 28mm - Hole Ø 5mm - Pack.500 pcs
Cod. A217C - Base 10mm - Height 28mm - Hole Ø 5mm - Pack.100 pcs