- Code:
AS10
Security Hanging System AS for wooden frames - 10 kit
- Net weight: grams 400 - Gross weight: grams 424
Security Hanging System AS for wooden frames - 10 kit
The "AS" security hanging system works like this:
1) On the two ends of the upper side of the frame fix two plates that have a horizontal groove. To fix them to the frame you need the special screws. Another plate is fixed in the center of the lower side of the frame.
2) In correspondence with the three plates, screw three "T" shaped screws onto the wall.
3) Position the frame against the wall so that the heads of the three screws fit into the groove of the three plates. This is only possible if the screw head is in a horizontal position.
4) Using a suitable tool (code AS9) screw all three screws by half a turn so that the head of the screw assumes the vertical position.
At this point the frame is firmly fixed to the wall. To be able to detach it from the wall you need to use the special tool again.
Each package of the AS code item is for one frame only and is made up of the following elements:
3 plates to be fixed to the frame
6 screws to fix the plates to the frame
3 "T" screws with relative plugs
The article AS10, on the other hand, includes the material for 10 frames, namely:
30 plates to be fixed to the frame
60 screws to fix the plates to the frame
30 "T" screws with relative plugs