- Code:
ASW
Security Hanging System ASW for wooden frames - 1 kit
- Net weight: grams 50 - Gross weight: grams 55
Security Hanging System ASW for wooden frames - 1 kit
The "AS" security hanging system works like this:
1) On the two ends of the upper side of the frame fix two plates that have a horizontal groove. To fix them to the frame you need the special screws. Another plate is fixed in the center of the lower side of the frame.
2) In correspondence with the three plates, screw three "T" shaped screws onto the wall.
3) Bring the frame close to the wall so that the head of the three screws fits into the groove of the three plates. This is only possible if the screw head is in a horizontal position.
4) Using a suitable tool (code AS9) screw all three screws by half a turn so that the head of the screw assumes the vertical position.
At this point the frame is firmly fixed to the wall. To be able to detach it from the wall you need to use the special tool again.
-------------------------------------------------- ---------------
The "ASW" system is similar to the "AS" system, with the difference that, on the upper side of the frame, it uses two shelves instead of two horizontal grooves. For the rest, the procedure is the same as the previous one.
The "ASW" package contains the necessary material for a frame, namely:
• 3 plates to be fixed to the frame
• 6 screws to fix the plate to the frame
• 2 shelves
• 2 screws with plugs
• 1 T screw