- Code:
J5x5A
Underpinner, pneumatic, Joint 5x5A
- Net weight: kg 27,00 - Gross weight: kg 27,00
-
Click on the link to open the video
Underpinner, pneumatic, Joint 5x5A
The bench pneumatic underpinner Joint 5x5A is manufactured in Italy by Pilm International.
It is a stapler suitable for framers with a sufficient volume of work (about 20 frames per week).
It is a simplified model of the J5x5Super and is very easy to use.
You need an air compressor to about 24 liters.
Technical features (included in the machine):
• Dual-function pedal: clamping of frame followed by wedge insertion
• Horizontal clamping for better corner joints
• Pneumatic upper clamping
• Maximum moulding width 10 cm
• Pressure and manometer regulator
• Pilm wedges of 7 - 10 - 15 mm
• Wedge compensators for 7 - 10 - 15 mm wedges
• Safety protection with blocking system
• 40 cycles per minute (at the maximum speed)
• Dimensions 35x45x32 cm
• Weight: 28 kg
Compared to J5x5Super, the J5x5A does NOT have:
• Locking front of the frames
• Pneumatic clamping of the square
• It has only one angle stop instead of two.
• Control of the descent of the pressure vertical
• Selector switch that lets you choose the automatic or manual
• Red button test wedges
Optionals:
• Adjustable inclination bench (code JB)
• Pair of work-bench extensions (code JJP)
• Hexagons square (code JE)
• Octagon square (code JQ)
• Lubricating filter (code JF)
• Glue dispenser (code JI)
• 4 mm wedge compensators (code JSA4)
• 7 mm wedge compensators (code JSA7)
• 10 mm wedge compensators (code JSA10)
• 12 mm wedge compensators (code JSA12)
• Pair of square levels (code JRS)