- Code:
J5x5S
Underpinner ,pneumatic, Joint 5x5 Super
- Net weight: kg 29,00 - Gross weight: kg 29,00
-
Click on the link to open the video
Underpinner ,pneumatic, Joint 5x5 Super
Used to join the corners of frames with wedges of different height (4, 7, 10, 12, 15 mm) according to the type of frame.
Joint underpinners work with compressed air. It is advisable to use a 24 litre compressor with 7 atmospheres.
Technical features:
• Pneumatic feeding 8 bar
• Horizontal clamping for better corner joints
• Pneumatic clamping to insert more wedges
• Pilm wedges of 4, 7, 10, 12, 15 mm
• Maximum moulding width: 100 mm
• Manometer pressure regulator
• Option beween manual or automatic cycle
• Pressurer down-speed regulator
• Safety protection with blocking system
• Test device for wedges
• 50 cycles per minute (at the maximum speed)
• Size 350x450x320 mm.
• Weight 31 Kg.
Optionals:
• Adjustable inclination bench for Joint (code JB)
• Pair of work-bench extensions for Joint and Jumbo (code JJP)
• Hexagons square for Joint and Jumbo (code JE)
• Octagon square for Joint and Jumbo (code JQ)
• Lubricating filter for Joint and Jumbo (code JF)
• Pair of level pressers with clamps for Joint/Jumbo (code JP)
• Pair of level pressers without clamps for Joint/Jumbo (code JP2)
• Glue dispenser for Joint and Jumbo (code JI)
• Flexible halogen lamp for Jumbo and Joint (code JA)
• 4 mm wedge insertion heads for Joint A e AS (code JSA4)
• 7 mm wedge insertion heads for Joint A e AS (cod. JSA7)
• 10 mm wedge insertion heads for Joint A e AS (cod. JSA10)
• 12 mm wedge insertion heads for Joint A e AS (cod. JSA12)
• Pair of square levels for Joint (code JRS)