- Code:
MG10
Wedges for Minigraf 10 mm - Pack 3000
- Net weight: kg 1,00 - Gross weight: kg 1,00
Wedges for Minigraf 10 mm - Pack 3000
Wedges produced by Alfamacchine suitable for all Minigraf underpinners.
The special design and the quality of the steel give the wedges an effect (Power Twist) which pushes the two sides of the frame towards the centre, thus obtaining a perfect joint.
The type of silicone with which the wedges are lubricated also allows for better penetration into the wood.
The distance between the two ends of the wedge is 11mm
The wedges are packaged in sticks of about 200 pieces.
There are 3 series of wedges: for soft woods, for hard woods, for very hard woods.
These are wedges for softwoods.
Available in the following heights:
MG5 = 5mm high - approx 5000 wedges per box
MG7 = 7mm high - approx 4000 wedges per box
MG10 = 10mm high - approx 3000 wedges per box
MG12 = 12mm high - approx 3000 wedges per box
MG15 = 15mm high - approx 2000 wedges per box
Test boxes (code MG66) are also available which contain a bar of wedges (about 200 wedges) for each height for a total of 1000 wedges.