- Code:
MGH10
Wedges for Minigraf 10 mm, hard wood - Pack 8000
- Net weight: kg 2,30 - Gross weight: kg 2,30
Wedges for Minigraf 10 mm, hard wood - Pack 8000
Wedges suitable for all Minigraf underpinners
The special design and the quality of the steel give the wedges an effect (Power Twist) which pushes the two sides of the frame towards the centre, thus obtaining a perfect joint.
The type of silicone with which the wedges are lubricated also allows for better penetration into the wood.
The distance between the two ends of the wedges is 11 mm
The wedges are packaged in sticks of about 200 pieces.
These are wedges for hardwoods.
Available in the following heights:
MGH7 = 7 mm high - approx 8000 wedges per box
MGH12 = 12mm high - approx 8000 wedges per box
MGH15 = 15mm high - approx 8000 wedges per box
The wedges are made in China by a manufacturer who produces wedges for well-known underpinner manufacturers. This is why they are guaranteed by Rinaldin.
Anyone with any prejudice regarding quality can buy the test box (code MGH66) which contains a bar of wedges (about 200 wedges) for each height for a total of 600 wedges.