- Code:
SC2
Shaped MDF struts for medium backs (smaller than cm 24x30)
- Net weight: grams 33 - Gross weight: grams 35
Shaped MDF struts for medium backs (smaller than cm 24x30)
These are the MDF supports for the MDF backrests.
They can be applied to back panels with hinges code 2341 or 239 or 2343.
The supports are available in three different sizes.
The size of the support must be proportionate to the size of the backrest.
The application to the backrest can be done with a punching machine or with a hammer.
It should be borne in mind that the projection of the support with respect to the backrest is usually 15 millimeters.
This protrusion is suitable for frames with a width of approximately 3 centimeters. If the width is greater than 3 cm, the inclination of the frame becomes excessive. If, on the other hand, the width of the frame is less than 3 cm, the inclination tends to decrease.