- Code:
STGLC
Glass cutting kit for SteelTrak Cutter
- Net weight: kg 2,10 - Gross weight: kg 2,10
Glass cutting kit for SteelTrak Cutter
The SteelTrak Cutter Glass Kit is optional with the cutter.
It is only used to break glass with the SteelTrak but not to cut it.
In fact, it is possible to cut glass even without the kit. However, if there is no kit, the glass must be removed from the cutter and broken on the workbench.
With the kit, on the other hand, it is possible to break the glass immediately after cutting, directly on the cutter.
ATTENTION: All the information of the SteelTrak cutter can be found by searching for its code (ST210).